What is the recommended configuration for Softron ? No need to change anything else on the other devices, the changes will be automatic. To be able to use the 4 individual 12G 4K inputs of the 8K Pro, you should select Connector Mapping "SDI 1 In or Out".By default the selected connector mapping is "SDI 1&2 In, SDI 3 & 4 Out".(a quick reminder that this will work only with drivers 11.1 and later).To be able to use the 8 individual inputs of the Quad 2, you should change the Connector mapping to "SDI 1" for the Decklink Quad (1), and do the same thing for the devices 2, 3 and 4:.This means that the connector number 1 and connector number 2 are "grouped". By default, for the first device, it should be set to Connector: SDI 1 & SDI 2.Depending on the device that you use, the connector mapping will be different.Ĭonnector Mapping for the Duo 2 and Quad 2 This will open the setting page for the “Connector Mapping”.Then click on the "Connectors" section:.Once you have selected the device you want to configure, click on the settings icon, or in the list view, click on the corresponding settings icon:.For a Decklink 8K Pro, you will have 4 "devices" named by default "Decklink 8K Pro (1) -> Decklink 8K Pro (4).For a Decklink Quad 2, you will have 8 "devices" named by default "Decklink Quad (1) -> Decklink Quad (8).For a Decklink Duo 2, you will have 4 "devices" named by default "Decklink Duo (1) -> Decklink Duo (4).Depending on the connected device, you will see more or less of them:.Then you can view all the "sub-devices":.But maybe the easies is to select the list view at the bottom right:.In the default view, use the left and right arrows to select the "Device" you want to configure.To change the connector mapping, start the application “Blackmagic Desktop Video Utility”, then: Where do I change the "Connector Mapping"? maintain compatibility with the previous versions of Decklink Duo and Quad cards (this is why the card is configured by default with the connectors "grouped").have the possibility to have a "passthrough" when using an ingest application such as MovieRecorder (so when you start MovieRecorder, the incoming signal is sent to the other connector for monitoring purposes).have the possibility to do internal and external key (which requires to "group" connectors).The main reason for this option is that Blackmagic-Design wanted to do 2 things: So if you want to use 4 individual inputs on the Duo 8 or 8K Pro, or 8 individual inputs on the Quad 2, you will have to change their connector mapping. with a Decklink 8K Pro, (drivers 11.1 and later) you will have maximum 1 in or 1 out.with a Decklink Quad 2, you will have maximum 4 in and 4 out.with a Decklink Duo 2, you will have maximum 2 in and 2 out. ![]() Here is what the default connector mapping of the cards allow you to do: Some cards from Blackmagic-Design require you to set the connector mapping to support some features.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |